 |
 |
 |
|
- Reduce your heating bills by up to 20%
- Easily fitted to wall behind radiator with no need to remove radiator first
- Tested and proven by many institutions including the UK Atomic Energy Authority, Scottish Energy Centre and Queen's University, Belfast.
Radiator insulation panels are a simple yet highly effective way of reducing heating bills and improving heat circulation in rooms thus making them warmer. It is estimated that as much as 70% of the heat produced by radiators is wasted on heating the wall behind it. As the radiator heats up, it warms the wall behind and this heat then transferred to the outside of the wall where it is lost.
Heatkeeper radiator panels significantly reduce this effect from occurring. With Heatkeeper the hot air naturally rising behind a radiator is caused to spin by the profile of the panel causing a series of vortices, rising at higher speed and continuing to spin out into the room. The wall behind the panel then stays cool.
Fitting the radiator panels throughout the home will cut heating bills by up to 20% and would save the average three bedroom house around $100 a year. The panels will therefore pay for themselves in less than 6 months.
There is no need to remove the radiators to fit the panels, all that is required is a dust behind the radiator to ensure the wall is clean. The panels come with comprehensive fitting instructions and a roll of double-sided super-adhesive tape. They are designed to fit the height of the most
common household radiator and are easily cut to fit different lengths. Each panel is 22.8" high x 17.7" wide x 0.3" deep. It takes 2-2˝ panels to cover a
typical radiator.
Features
- Available in packs of 10 and 20 panels.
|
|
|
|
|
|
|
|
|
